Technical Data - Parkside PSTDA 20-Li B3 Translation Of The Original Instructions

GB CY
24 Charger
25 Storage case
26 Adapter for external dust extrac-
tion
27 Alignment adapter
29 Recess
28 Clamping lever

Technical data

Cordless Jigsaw ......PSTDA 20-Li B3
Nominal input voltage ................. 20 V
Idle speed n ......................0 - 2700 rpm
0
Saw stroke .................................. 20 mm
Cutting depth in wood .......... max. 80 mm
Cutting depth in aluminium .... max. 12 mm
Cutting depth in metal .................... 5 mm
Weight (with battery) ............ max. 2.1 kg
Sound pressure level
(L ) ................... 85,2 dB(A), K
pA
Sound power level
(L ) ................. 96,2 dB(A), K
WA
Vibration (a
)
h
in wood .......... 9,27 m/s
in metal ........ 12,67 m/s
Temperature.......................... max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
The device is part of the Parkside X 20 V
TEAM series and can be operated with
batteries of the Parkside X 20 V TEAM
series.
Batteries of the Parkside X 20 V TEAM
series may only be charged using chargers
of the Parkside X 20 V TEAM series.
6
= 5 dB
pA
= 5 dB
WA
2 ; K= 1,5 m/s 2
2 ; K= 1,5 m/s 2
We recommend that you operate this
appliance with the following batteries only:
PAP 20 A1, PAP 20 A3.
We recommend charging these batteries
with the following chargers: PLG 20 A1,
PLG 20 A3, PDSLG 20 A1.
PLG 20 A1 PLG 20 A3
Charging
time (min.)
PAP 20 A1
60
PAP 20 A3
120
Levels of noise and vibration were deter-
mined according to the standards and reg-
ulations in the declaration of conformity.
The vibration emission value has been
measured according to a standardised test-
ing method and may be used for compari-
son with another power tool.
The indicated vibration emission value may
also be used for an introductory assess-
ment of the exposure.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
PDSLG 20 A1
30
60