Trouble Shooting - Parkside PSTDA 20-Li B3 Translation Of The Original Instructions

Trouble shooting

In the event of an accident or malfunction, remove the battery from the device im-
mediately! Failure to comply may result in injuries from cuts.
Problem
Appliance won't
start
Intermittent
operation
Poor sawing perfor-
mance
Saw blade quickly
becomes blunt
Possible cause
Battery (22) not inserted
Battery (22) discharged
On/Off switch (2) defective
Motor defective
Internal loose contact
On/Off switch (2) defective
Saw blade (16/17) unsuit-
able for the workpiece to be
processed
Saw blade (16/17) is blunt
Incorrect sawing speed
Low battery power
Saw blade (16/17) unsuit-
able for the workpiece to be
processed
Too much pressure applied
Sawing speed too high
Corrective action
Insert battery (22) (Observe the
separate operating instructions
for the rechargeable battery and
charger)
Recharge battery (22) (Observe
the separate operating instruc-
tions for the rechargeable batte-
ry and charger)
Send in to Service Centre for
repair
Send in to Service Centre for
repair
Insert a suitable saw blade
(16/17)
Insert a new saw blade (16/17)
Adjust sawing speed
Charge the battery (22) (observe
the separate operating instruc-
tions for the battery and charger)
Insert a suitable saw blade
(16/17)
Reduce the pressure
Reduce the sawing speed
GB CY
17