Additional Safety Instructions; Additional Safety Instructions For Sabre Saws - Parkside PSTDA 20-Li B3 Translation Of The Original Instructions

GB CY
outside the permitted temperature
range may destroy the battery and in-
crease the risk of fi re.
6) SERVICE
a) Have your power tool serviced
by a qualifi ed repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batter-
ies. All battery repairs should be car-
ried out by the manufacturer or author-
ised customer service centres only.

Additional safety instructions

• Hold the electric tool by the in-
sulated gripping surfaces when
performing work in which the
cutting tool may come into con-
tact with hidden wiring. Contact
with a live wire can also cause a
charge in metal parts of the device and
result in an electric shock.
• Fasten and secure the workpiece
by means of clamps or with
another method on a stable un-
derground. If you hold the workpiece
only with your hand or against your
own body, it will stay instable and this
can lead to a loss of control.
• Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric shock
or fi re.
Observe the safety informa-
tion and notes on charging
and proper use as shown in
the instruction manual for
your battery and charger from
the Parkside X 20 V Team se-
10
ries. A detailed description of
the charging process and fur-
ther information can be found
in the separate operating in-
structions.
Additional safety instructions
for sabre saws
• Keep hands away from the sawing
area. Do not reach underneath the
workpiece. Upon contact with the
blade there is a risk of injury.
• Move the power tool against the work-
piece only when it is turned on. Other-
wise, there is a risk of kickback if the
attachment tools jam in the workpiece.
• Make sure that the footplate is secure
during sawing. A tilted saw blade may
break or cause a kickback.
• After you have fi nished work, turn the
power tool off and do not pull the saw
blade out of the cut until it has come to
a standstill. In this way you will avoid
any kickback and can safely put down
the power tool.
• Use only undamaged saw blades in
perfect condition. Bent or blunt blades
can break, adversely affect the cut or
cause kickback.
• Do not brake the saw blade after
switching the device off by applying
side pressure. The saw blade may be
damaged, break or cause a kickback.
• Use suitable detectors in order to fi nd
hidden supply lines or consult the local
utility company. Contact with electric
cables can lead to fi re and electric
shock. Damage to a gas pipe can
cause an explosion. Penetration into a
water line causes property damage.
• Secure the workpiece. A workpiece
that is retained with clamping appli-
ances or a vice is held more securely
than with your hand.