Step 4: Set Fabric Selector; Step 5: Insert Coin(S) Or Card; Step 6: Start Dryer - Speed Queen SFET07 Installation And Operation Manual

Operation

Step 4: Set Fabric Selector

Select HIGH TEMP, MED TEMP, LOW TEMP
or NO HEAT by pushing touchpad.
NOTE: Always follow manufacturer's care label
instructions.
HIGH
START
TEMP
MED
TEMP
Figure 43

Step 5: Insert Coin(s) or Card

To Insert Money
Insert coin(s) in coin slot. Check pricing as seen on
digital display.
Figure 44
30
LOW
TEMP
NO
HEAT
D452I
D452I
W387I
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To Insert Card
Insert card into opening. Follow directions on display.
DO NOT REMOVE THE CARD UNTIL DISPLAY
READS "Remove Card".
Figure 45
If Additional Time Feature is turned on, additional
dryer time may be purchased at cycle start or while
dryer is running.
Remove knits when slightly damp because overdrying
may cause shrinkage. Do not tumble dry knit woolens.

Step 6: Start Dryer

To start dryer, push START pad.
To stop dryer at any time, open the door. To restart the
dryer, close door and push START pad.
Cycle is completed when time remaining reaches
00 minutes.
HIGH
START
TEMP
MED
TEMP
Figure 46
M330I
M330I
LOW
TEMP
NO
HEAT
D451I
D451I
510977