Using The Shaver - Philips SP9890 Manual

Using the shaver

Switching the shaver on and off
- The wireless Qi charging pad beeps and the ring on
the pad lights up when the shaver is correctly placed
and connected for charging.
- When the shaver is charging, the ring on the pad
lights up and the battery charge indicator on the
shaver flashes white. The battery charge is indicated
by the battery charge percentage flashing on the
display, which is shown when the shaver is moved.
3 When the battery is fully charged, the battery charge
indicator and the ring on the pad light up white
continuously. Both lights switch off automatically
after 15 minutes.
Always check the shaver and all accessories before
use. Do not use the shaver or any accessory if it is
damaged, as this may cause injury. Always replace a
damaged part with one of the original type.
This symbol indicates that the shaver can be used in the
bath or shower.
- Use this shaver for its intended household use as
described in this manual.
- For hygienic reasons, the shaver should only be used
by one person.
- Trimming is easier when the skin and hair are dry.
Note: This shaver is waterproof. It is suitable for use in the
bath or shower and for cleaning under the tap. For safety
reasons, the shaver can only be used without cord.
1 To switch on the shaver, press the on/off button once.
The battery charge percentage lights up for a few
seconds.
2 To switch off the shaver, press the on/off button once.
The battery charge percentage lights up for a few
seconds and shows the remaining battery charge.
13
English