Philips SP9890 Manual page 9

General
The display
Charging
Battery fully charged
Battery low
- This shaver is waterproof. It is suitable for use in the
bath or shower and for cleaning under the tap.
- The supply unit is suitable for mains voltages ranging
from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a safe low
voltage of less than 24 volts.
Note: Remove any sticker or protective foil from the
display before using the product.
When the shaver is charging, the ring on the pad lights
up and the battery charge indicator on the shaver flashes
white.
The battery charge is indicated by the battery charge
percentage flashing on the display, which is shown when
the shaver is moved.
Quick charge: After approx. 18 minutes charging, the
appliance contains enough energy for one shave.
When the battery is fully charged, the battery charge
indicator and the ring on the pad light up white
continuously.
Note: Both lights switch off automatically after 15
minutes.
The battery charge percentage lights up white
continuously, which is shown when the shaver is moved.
When the battery is almost empty, the battery charge
indicator flashes orange and the shaver beeps. At this
point there is enough energy left for one shave..
9
English