Philips SP9890 Manual page 17

Using the beard styler attachment with comb
2
1
You can use the beard styler with the comb attached to
style your beard at one fixed setting, but also at different
length settings. You can also use it to pre-trim any long
hairs before shaving for a more comfortable shave.
Note: The beard styler is only intended for trimming facial
hair. Do not use on areas below the neck.
The length settings on the beard styler attachment
correspond to the remaining hair length after cutting and
range from 1 to 5 mm (3/64 - 3/16 in).
1 Attach the attachment to the appliance ('click').
2 Slide the comb straight into the guiding grooves on
both sides of the beard styler attachment ('click').
3 Press the length selector and then push it to the left or
right to select the desired hair length setting.
4 Switch on the appliance.
5 Move the appliance upwards while you exert gentle
pressure. Make sure the front of the comb is in full
contact with the skin.
6 Clean the attachment after use.
17
English