Philips SP9890 Manual page 25

Cleaning the trimmer attachment
6 Clean the cutter and guard under the tap.
You can also use the cleaning brush to remove excess
hairs before rinsing.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head holder.
10 Place the retaining ring on the shaving head.
11 Align the arrows on the retaining ring with the
projections in the shaving head holder. Turn the ring
clockwise until it clicks to indicate that the ring is
fixed.
12 Attach the shaving head holder to the bottom part of
the shaving unit ('click').
Never dry the trimmer with a towel or tissue, as this
may damage the trimming teeth.
Clean the trimmer attachment after each use.
1 Switch on the appliance with the precision trimmer
attachment attached.
25
English