Philips SP9890 Manual page 33

Shaver
Problem
The appliance does
not work when I
press the on/off
button.
The appliance
does not shave as
well as it used to.
I replaced the
shaving heads, but
the display still
shows the
replacement
reminder.
A shaving unit
symbol has suddenly
appeared on the
display.
unable to solve the problem with the information below,
visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Center in
your country.
Possible cause
The appliance is still
placed on the wireless
Qi charging pad.
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged to
such an extent that the
motor cannot run.
The shaving heads are
damaged or worn.
Hairs or dirt obstruct
the shaving heads.
You have not reset the
appliance.
This symbol reminds
you to replace the
shaving heads.
English
Solution
Remove the appliance from
the wireless Qi charging pad
and press the on/off button
to switch on the appliance.
Recharge the battery (see
'Charging').
Press the on/off button for 3
seconds to deactivate the
travel lock.
Clean the shaving heads
thoroughly or replace them.
Replace the shaving heads
(see 'Replacement').
Clean the shaving heads in
the regular way or clean
them thoroughly.
Reset the appliance by
pressing the on/off button
for approx. 7 seconds.
Replace the shaving heads
(see 'Replacement').
33