Table of Contents
Advertisement
About this task
The figure indicates the location of the power button with fingerprint and provides a visual representation of the installation
procedure.
Steps
1. Locate the power button with fingerprint slot on your computer.
2. Align and place the power button with fingerprint into the slot on your computer.
3. Install the two (M2x2) screws that secure the power button to chassis of your computer.
Next steps
1. Install the
system
board.
2. Install the
memory
module.
3. Install the
inner
frame.
4. Install the
WWAN
card.
5. Install the
WLAN
card.
6. Install the HDD.
7. Install the
solid state
drive.
8. Install the battery.
9. Install the
base
cover.
10. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
WLAN
card.
5. Remove the
WWAN
card.
76
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
