Steps
1. Locate the DC-in slot on your computer.
2. Insert the DC-in port into the slot on your computer.
3. Connect the DC-in cable to the system board.
4. Place the DC-in metal bracket on the DC-in port.
5. Install the two screws (M2x5) that secure the DC-in metal bracket to the system board.
Next steps
1. Install
theheat sink (for discrete
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure in
Solid-state drive
Removing the SSD
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
40
Disassembly and reassembly
only).
After working inside your
Before working inside your
computer.
computer.