Table of Contents
Advertisement
Steps
1. Locate the keyboard bracket slot on your computer.
2. Align and place the keyboard on the keyboard bracket.
3. Press down on the lattice at the snap points, in order to secure the keyboard assembly to the palmrest.
NOTE:
The keyboard has multiple snap points on the lattice side which must be pushed down firmly after the keyboard
is replaced.
4. Install the eleven (M2x2) screws to secure the keyboard to the keyboard bracket.
Next steps
1. Install the keyboard.
2. Install the
system
board.
NOTE:
System board can be removed with heatsink attached.
3. Install the
memory
module.
4. Install the
inner
frame.
5. Install the
WWAN
card.
6. Install the
WLAN
card.
7. Install the HDD.
8. Install the
solid state
drive.
9. Install the battery.
10. Install the
base
cover.
11. Follow the procedure in
74
Disassembly and reassembly
After working inside your
computer.
Advertisement
Table of Contents
