Touchpad buttons
Removing the touchpad buttons
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
solid state
5. Remove the HDD.
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
inner
frame.
About this task
The figure indicates the location of the touchpad buttons and provides a visual representation of the removal procedure.
Steps
1. Locate the touchpad buttons board on your computer.
2. Open the latch and disconnect the smart card reader board cable from the system board.
3. Open the latch and disconnect the touchpad buttons cable from the connector.
4. Remove the two (M2x3) screws that secure the touchpad buttons to the palmrest.
5. Lift the touchpad buttons out of the computer.
Before working inside your
drive.
computer.
Disassembly and reassembly
51