Table of Contents
Advertisement
Table 6. Factory default settings for the Orbi router (Continued)
Feature
Firewall
Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Access control
WiFi
WiFi communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel 2.4 GHz fronthaul
RF channel 2.4 GHz backhaul
RF channel 5 GHz fronthaul
RF channel 5 GHz backhaul
RF channel 6 GHz
(only fronthaul supported)
-
Factory Settings and Technical
Specifications
Whole Home Quad-Band Mesh WiFi 7 System
Default Setting
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Enabled
See router label
WPA3
Enabled
Auto
Note: Maximum wireless signal rate derived from IEEE Standard 802.11
specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data
throughput rate.
United States of America; otherwise, varies by region
Auto
Auto
North America and China: Channel 48
Worldwide and Japan: Channel 36
North America and China: Channel 157
Worldwide and Japan: Channel 108
HE20: 33–233
HE40: 35–227
HE80: 39–215
HE160: 45–209
163
User Manual
Advertisement
Table of Contents
