Table of Contents
Advertisement
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6. In the Port Triggering Portmap Table, select the radio button for the service.
7. Click the Edit Service button.
The Port Triggering Services page displays.
8. Change any of the following settings.
• Service Name: Type the service name.
• Service User: From the menu, select Any, or select Single address and enter
the IP address of one computer:
-
Any: This selection (the default) allows any computer on the local area network
(LAN) to use this service.
-
Single address: This selection restricts the service to a particular computer
om the LAN. Enter the IP address in the field that becomes available with this
selection from the menu.
• Service Type: From the menu, select the service type, which can be TCP or UDP.
• Triggering Port: Enter the number of the outbound traffic port that must open
the inbound ports.
• Connection Type: From the menu, select the inbound connection type, which
can be TCP, UDP, or TCP/UDP.
If you are not sure, select TCP/UDP.
• Starting Port and Ending Port: Enter the inbound connection port numbers.
For a single port, enter the same number in each field.
9. Click the Apply button.
Your settings are saved. The changed service displays in the Port Triggering Portmap
Table on the Port Forwarding / Port Triggering page.
Customize Internet Traffic Rules
for Ports
Whole Home Quad-Band Mesh WiFi 7 System
136
User Manual
Advertisement
Table of Contents
