Table of Contents
Advertisement
Update the router and satellite firmware
You can use the router web interface to check if new firmware is available and update
your router and satellites, or you can manually update the firmware for your router and
satellites.
Check for firmware updates
To check for new firmware and update your router and satellite:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Firmware Update > Online Update.
The Firmware Update page displays.
5. Click the Check button.
The router checks to see if new firmware is available for the router and satellites.
6. If new firmware is available, click the Update All button.
The router locates and downloads the firmware for the router and satellites and
begins the update.
WARNING:
the upgrade. For example, do not close the browser, click a link, or load a
new page. Do not turn off the router or satellite.
When the upload is complete, your router and satellites restart. The update process
typically takes about two minutes. Read the new firmware release notes to find out
if you must reconfigure the router after updating.
Mantain and Monitor Your
Network
Whole Home Quad-Band Mesh WiFi 7 System
To avoid the risk of corrupting the firmware, do not interrupt
102
User Manual
Advertisement
Table of Contents
