Table of Contents
Advertisement
I
"
L
2. Start the engine and keep
it
idling un-
til oil begins to seep from the oil gallery
bolt.
If no oil comes out after one minute,
turn the engine off so it will not seize.
3. Restart the engine after solving the
problem(s), and recheck the oil, pressure.
4. After checking, tighten the oil gallery
bolt to specification.
1.
Oil gallery
bolt
Tightening torque:
Oil gallery bolt:
7 Nm (0.7 m·kg, 5.1
ft· lb)
Final gear oil
1.
Oil level measurement
a. Place the machine on a
level
place.
The engine should be cool
(at
atmos-
pheric
temperature).
b. Remove the oil filler cap and
check
the
oil level whether
it
is
to the hole
brim.
If it is not up to this level,
replenish
oil
..
Take care not to allow foreign material to
enter the final gear case.
-64-
Advertisement
Table of Contents
