Microsoft XBOX CONTROLLER Repair Instructions page 5

Hide thumbs Also See for XBOX CONTROLLER:

Repair-Specific Precautions and Warnings

Before opening a device, ensure it is powered off and disconnected from its

power source for at least 30 seconds. Disconnect the device charger or power cord from

mains power.

For devices with rechargeable lithium-ion batteries that power on, fully discharge the

•

battery before beginning repair. To expedite the battery discharge process:

▪

As you remove each subassembly from the device, place the subassembly (and all

•

accompanying screws) away from the work area to prevent damage to the device or to the

subassembly.

During all activities, check to ensure that no loose articles are on the battery or remain

•

inside the device before reassembling it.

Internal Power Supplies

Failure to take the following steps during device repair or component

replacement can result in serious personal injury or death from electric shock or in damage

to your device.

For optimum compatibility, performance, and product safety, we recommend using a

•

genuine AC power supply and AC power cord for your Microsoft device.

Connect the controller to a device wirelessly.

Operate the device in wireless mode until the battery is fully discharged and the

device powers off.

Table of Contents