Download Print this page

Microsoft XBOX CONTROLLER Repair Instructions page 36

Hide thumbs Also See for XBOX CONTROLLER:

7. Remove Palm Motors

Remove the palm motors from the mid-frame using a plastic pry tool to gently pry the

retention clip back while pushing up on the motor from the bottom. This may require you

to gently wiggle them out.

NOTE:

The motors are soldered to the mainboard. This solder connection is very

fragile at both the motor and board ends. Take care not to damage the soldered

connections.

8. Remove Mainboard Screws

Using a T5 (Torx) screwdriver remove the two marked screws that secure the mainboard to

the mid-frame.

Table of Contents