Microsoft XBOX CONTROLLER Repair Instructions page 48

Procedure – Installation (I/O Board)
1. Insert I/O Board
Place the I/O board in the mid frame in reverse to how it was removed.
2. Install Screws
Using a T5 (Torx) screwdriver install the 4 screws securing the I/O board to the mid-frame.
Turn each screw until finger tight then tighten by an additional 1/8 turn (45-degrees) or
until fully fastened.
3. Install Mainboard
Install the Mainboard as detailed in the Procedure – Installation (Mainboard)
4. Install D-Pad
Install the D-Pad as detailed in the Procedure – Installation (D-Pad)
5. Install Top Case
Install the top case as detailed in the Procedure – Installation (Top Case)
(page 31)
(page 21)
(page 14)
47