Table of Contents
Advertisement
1.10.2 - Insertion of Batteries in the Remote Control
Insert two AAA batteries into the remote control. Make sure that you match
the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the
battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
•
Only use the specified AAA batteries.
•
Do not mix new and old batteries. This may result in cracking or
leakage that may pose a fire risk or lead to personal injury.
•
Inserting the batteries incorrectly may result in cracking or leakage
that may pose a fire risk or lead to personal injury.
•
Dispose of the batteries in accordance with local laws and
regulations.
•
Keep the batteries away from children and pets.
1.10.3 - Remote Control Range
•
Point the remote control at the remote control sensor to transmit the commands.
•
Do not place any obstacles between the remote control and the receiver window.
•
The effective range of the remote control is approximately 6 feet (2 meters) from the front
of the receiver window, 30º to the left and right, 20º up and down.
1.10.4 - Precautions for the VIZIO Remote Control
•
Remote control should be kept dry and away from heat sources. Avoid humidity.
•
If the display responds erratically to the remote control or does not respond at all, check
the batteries. If the batteries are low or exhausted, replace them with fresh batteries.
•
When not using the remote control for a long period of time, remove the batteries.
•
Do not take apart the batteries, heat them, or throw them into a fire.
•
Do not subject the remote control to undue physical stress, such as striking or dropping it.
•
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean,
damp cloth.
Version - 9/23/2004
11
Advertisement
Table of Contents
