Table of Contents
Advertisement
3.4 DTV / TV Tuner Setup
When you first used your VIZIO VW32L HDTV20A you will have setup your TV for DTV / TV channels
using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from
the TV TUNER SETUP menu.
3.4.1 Tuner Mode
When the MENU button is pressed, the On Screen
Display
(OSD)
appears
adjustment page. Press the
the TV page.
Press the
button to highlight the Tuner Mode
selection.
Press either
or
button to choose Cable or Air
(Antenna) depending upon which equipment you
have attached to the DTV / TV Input.
3.4.2 Auto Search
Press the
button to highlight the Auto Search
selection.
Press the
button to Auto Search for TV
channels available.
search for analog and digital channels.
3.4.3 Skip Channel
After the TV has stored all of the available DTV channels in memory you will find that some channels will
be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove.
Press the MENU and
Press the
button to highlight SKIP CHANNEL.
Press the
button to select this channel to be skipped when using the CH+ or CH- button. You will still
be able to select this channel using the number buttons on the remote control.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Version 9/17/2007
on
the
PICTURE
button to display
The TV will automatically
buttons to open the TV TUNER SETUP menu.
www.VIZIO.com
VIZIO VW32L HDTV20A User Manual
45
Advertisement
Table of Contents
Troubleshooting
