Sony Ericsson Z1010 User Manual page 5

To insert the SIM card and
charge the battery
This is the Internet version of the user's guide. © Print only for private use.
1
Insert the SIM card. Make sure the SIM card is
placed under the silvery holders.
2
Place the battery on the back of the phone with
the label side up and the connectors facing
each other.
3
Place the back cover as shown in the picture
and slide it into place.
4
Connect the charger to the phone at the flash
symbol. The flash symbol on the charger plug
must face upwards.
5
It may take up to 30 minutes before the battery
icon appears on the screen.
6
Wait approximately 4 hours or until the
battery icon indicates that the battery is fully
charged. If you do not see the battery icon
after this time, press any key or
activate the screen.
7
Remove the charger by tilting the
plug upwards.
PIN (Personal Identity Number)
You may need a PIN (Personal Identity Number) to
activate the services in your phone. Your PIN is
provided by your network operator. When you
enter your PIN, the digits are hidden with an *,
unless your PIN starts with the same digits as an
Getting started
to
5