Table of Contents
Advertisement
Step 16: Door Install
You will need for this page:
(QTY: 8)
1
From inside the building, place the
bottom of the Door into the Front
Floor Frame track at about the half-
open position.
2
Rotate the Door forward until it is
vertical and align the Door Slides
with the Door.
3
Insert two (2) black screws into
each Door Slide as shown below.
Repeat steps for second Door.
Door Adjustment
If Doors do not align, raise or lower one side of the Door by placing
the Door screws through a diff erent set of holes in the Door Slide.
Assemblies from Step 16:
•
Right Door Assembly (1)
•
Left Door Assembly (1)
Half-Open Position
Closed Position
36
Gable
Door Slide
Door Track
INSIDE BUILDING
Door
Front Floor Frame
41AW
Advertisement
Table of Contents
