Cancelling The Programme; End Of Programme; Homewhiz Feature And Remote Control Function - Beko CM 9120 B User Manual

6.13 Cancelling the Programme

When the machine is turn on and off the pro-
gramme gets cancelled. Press and hold On/
Off button for 3 seconds.
If you turn the programme selection
button when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading door
after you have cancelled the pro-
gramme but it is not possible to
open the loading door since the wa-
ter level in the machine is above the
loading door baseline, then turn the
Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.

6.14 End of Programme

End warning appears on the display when
the programme is completed.
The product automatically shuts down if no
buttons are pressed for 10 minutes. Display
and all indicators are turned off.
Completed programme steps will be dis-
played if you press the On/Off button.
6.15 HomeWhiz Feature and Remote
Control Function
HomeWhiz enables you to control your
washing machine by using your smart appli-
ance and get information about the status of
the machine. With HomeWhiz application,
you can use your smart appliance to perform
various operations on the machine. Further-
more, you can use some features only with
HomeWhiz function.
In order to use the Bluetooth feature of your
machine, you must download HomeWhiz
application from the application store of your
smart appliance.
Make sure your smart appliance is connec-
ted to the internet to install the application.
If you are using the application for the first
time, please follow the instructions on the
screen to complete your user account regis-
tration. Once the registration procedure is
complete, you can use all products with the
HomeWhiz feature in your house on this ac-
count.
You can touch the "Appliances" tab in the
HomeWhiz application to view appliances
paired with your account. Following the in-
stallation of the application, HomeWhiz func-
tion enables the washing machine to send
you instant notifications via your smart appli-
ance.
In order to use the HomeWhiz func-
tion, the application must be in-
stalled on your smart appliance, and
your washing machine must be
paired with your smart appliance via
Bluetooth. If your washing machine
is not paired to your smart device it
works as an appliance which does
not have a HomeWhiz feature.
Your product will operate as paired
to your smart device via bluetooth.
The controls made by means of the
application will be enabled through
this pairing. Therefore the bluetooth
signal strength between the appli-
ance and the smart device must be
adequate.
Please visit
the Android and iOS versions sup-
ported by the HomeWhiz applica-
tion.
All the safety measures described in
"GENERAL SAFETY INSTRUC-
TIONS" section of your user manual
apply to the remote operation
through HomeWhiz function as well
EN / 34
to see
www.homewhiz.com