Starting The Programme; Loading Door Lock - Beko CM 9120 B User Manual

If you want to cancel the End Time function,
turn off and on the product by pressing the
On/Off button.
When you have activated the End
Time function, do not add liquid de-
tergent in the powder detergent
compartment no 2. There is the risk
of staining of the clothes
a. Open the loading door, place the laundry
and put detergent, etc.
b. Select the washing programme, temper-
ature, spin speed and, if required, the
auxiliary functions.
c. Set the end time of your choice by press-
ing the End Time Setting button. End
Time Setting indicator illuminates.
d. Press Start / Pause. Time countdown
starts.
Additional laundry can be added into
the machine during the End Time
countdown. At the end of the count-
down, End Time indicator turns off,
washing cycle starts and the time of
the selected programme appears on
the display.

6.10 Starting the Programme

a. Press Start / Pause button to start the
programme.
b. Loading door is locked. The door lock
symbol appears on the display after the
loading door is locked.
c. Programme follow-up indicator lights on
the display will show the current pro-
gramme step.
If no programme is started or no
button is pressed within 10 minutes
during programme selection pro-
cess, the product will automatically
turn off. Display and all indicators
turn off.
If you press On / Off button, the de-
fault selected programme informa-
tion is displayed.

6.11 Loading Door Lock

There is a locking system on the loading
door of the machine that prevents opening
of the loading door in cases when the water
level is unsuitable.
"Door Locked" symbol appears on the dis-
play when the loading door is locked.
The door will be locked if Remote
Control Function is selected. In order
to open the door you must deactiv-
ate Remote Start Function by either
pressing the Remote Start button or
changing the programme position.
Opening the loading door in case of
power failure:
In case of power failure, you can use
the loading door emergency handle
under the pump filter cap to open
the loading door manually.
To avoid any water overflow before
opening the loading door, make sure
there is no water left inside the ma-
chine.
a. Turn off and unplug the appliance.
b. Open the pump filter lid.
EN / 32