Ericsson R320s User Manual page 132

132 Accessories
Tip! If you do not want your phone to switch profile automatically when you
connect it to the Advanced Vehicle Handsfree, you need to turn the Auto
Activation off. To do this, manually select the 'In Car' profile and set the Auto
Activation to off.
Voice Control
The Advanced Vehicle handsfree unit is equipped with its own voice control
system which allows you to:
• voice dial - call someone by simply saying the name
• answer and reject calls using your voice
Before you can use voice dialling, you need to record voice labels to entries in
your phone book and the Voice Dialling function needs to be on.
See "Preparing Your Phone for Voice Dialling" on page 112. To use voice
dialling with the Advanced Vehicle handsfree unit, you need to record the
voice labels in the car. Voice labels for phone book entries recorded in the
phone will not be available in the car, and vice versa.
The vehicle handsfree can store up to 100 voice labels. The icons for the
phone book entries with voice labels saved when connected to a vehicle
handsfree kit look slightly different from those that you save in the phone, see
margin.
To voice dial using the Vehicle Handsfree
1. Slide and hold the volume key or press
2. Release and say a name (voice label) that you recorded in the car earlier.
(Use the microphone of the vehicle handsfree unit.)
The name is played back to you, and the call is connected.
To answer a call using your voice
• See "Voice Answering" on page 114.
Handsfree Types
If you use an Advanced Vehicle Handsfree Unit, you can choose between
two different ways in which your phone can handle the speech. This is done in
the Handsfree sub-menu.
Basic Handsfree
Basic Handsfree means that the phone handles the call in semi-duplex mode.
This means that you cannot speak at the same time as the person at the other
end of the line. Use this alternative only if Full Handsfree does not work
properly.
until you hear a tone.
Y E S