Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna K6500 Operator's Manual

Symbols on the mac hine:
W ARNING ! The machine can be a
dangerous tool if used incorrectly or
c arelessly, which can cause seri ous or
fatal injury t o t he operator or others.
Please read the operator's manual
c arefully and make sure you
understand the instruc tions before
using the machine.
Wear personal prot ective equipment.
See instructions under the "Personal
protective equipment" heading.
Ensure the blades are not cracked or
damaged in any other way.
Do not use circular saw blades
WARNING! Dus t forms when cutting,
which can cause injuri es if inhaled. Use
an approved breathing mask. Always
prov ide f or good ventilati on.
WARNING! Sparks from the cutting
blade can cause fire in combust ible
mat erials such as: petrol (gas), wood,
dry grass etc.
WARNING! Kickbac ks can be sudden,
rapid and v iolent and can c ause life
t hreatening injuries. Rea d and
understand the instruc tions in the
manual before using t he machine.
This product i s in accordance with
applicable EC directives.
2 – English
KEY T O SYMBOLS
En vironmental ma rking. Symbols on
the product or its pack aging indicate that
this product cannot be handled as
domestic waste. It must instead be
s ubmitted to an appropriate recy cling
s tation for the recovery of elec trical and
electronic equipment.
By ensuring that this product is taken ca re of correctly, you
c an help to counteract the potential negative impact on
the env ironment and people that can otherwise result
through the incorrect waste management of this product .
For more detailed infor mation about recycling this
product, contact your municipality, your domestic wast e
s erv ice or the shop from where you purchased the
product.
Other symbol s/decals on the mac hine refer to special
certification r equir ements for certain markets.
Explanation of warning le vels
The w arnings are graded in three levels.
W ARNING!
CAUTION!
NOTI CE!
NO TICE! Used if there is a risk of damage to materials
or the machine if the instruct ions i n t he manual are not
followed.
W ARNING! Used if the re is a r isk of
!
serious injur y or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
CA UTI ON! Used if there is a risk of injury
!
to the ope rator or damage to the
surroundings if the instructions in the
manual are not followed.