Nikon Z 6II Reference Manual page 675

Hide thumbs Also See for Z 6II:

Table of Contents

C : Choose a link mode for the

Select [Wireless remote (WR)

options] > [Link mode] in the

camera setup menu and choose from

the following options:

The camera connects only to devices with which it

has previously been paired.

As camera will not communicate with devices with

which it has not been paired, this option can be

used to prevent signal interference from other

devices in the vicinity.

Given that each device must be paired separately,

however, PIN is recommended when connecting

to a large number of devices.

Communication is shared among all devices with the

same four-digit PIN.

This option is a good choice for photography

featuring a large number of remote devices.

If there are multiple cameras present that share the

same PIN, the flash units will be under the sole

control of the camera that connects first,

preventing all other cameras from connecting (the

LEDs on the WR-R10 units connected to the

affected cameras will blink).

Chapters

Table of Contents