Role
[Same as multi
Y
selector]
[Focus point
x
selection]
X [Focus (M/A)]
Pressing the sub-selector up, down, left, or
right during shooting or playback has the
same effect as pressing 1 , 3 , 4 , or 2 on the
multi selector. To choose the role played by
the sub-selector during focus or playback
zoom, highlight [Same as multi selector] and
press 2 .
•
Select [Scroll] to use the sub-selector to
scroll the display.
•
Select [Display next/previous frame] to use
the sub-selector to page through pictures
without altering the zoom ratio.
Use the control to select the focus point. Using
the control during playback ends playback
and enables focus-point selection.
Autofocus can be over-ridden by rotating the
lens control ring (autofocus with manual
override). The control ring can be used for
manual focus while the shutter-release button
is pressed halfway. To refocus using autofocus,
lift your finger from the shutter-release button
and then press it halfway again.
A Custom Settings: Fine-Tuning Camera Settings
Description
425