•
If [On] is selected for [Silent photography] or [Time-lapse movie] is
selected for [Options], the standby timer will not expire during interval-
timer photography, regardless of the option selected for Custom
Setting c3 [Power off delay] > [Standby timer].
•
If the memory card is full, the interval timer will remain active but no
pictures will be taken. Insert another memory card and resume shooting
( 0 335).
•
Depending on memory card performance and shooting conditions,
shooting may end before the selected number of shots have been taken
or the selected number of intervals is complete.
•
Interval timer shooting will pause if:
- The camera is turned off and then on again (when the camera is off,
batteries and memory cards can be replaced without ending interval-
timer photography)
- E is selected for release mode
•
Changing camera settings while the interval timer is active may cause
shooting to end.
D
Release Mode
Regardless of the release mode selected, the camera will take the
specified number of shots at each interval.
D
Adjusting Settings Between Shots
Pictures can be viewed and shooting and menu settings adjusted
between shots. Note, however, that the monitor will turn off and shooting
will resume a few seconds before the next shot is taken.
C The Photo Shooting Menu: Shooting Options
338