Link Mode - Nikon Z 6II Reference Manual

Link Mode

Choose a link mode for WR-R10 wireless remote controllers
mounted on other cameras or radio-controlled flash units that
support Advanced Wireless Lighting. Be sure that the same
mode is selected for the other devices.
Option
[Pairing]
B The Setup Menu: Camera Setup
480
The camera connects only to devices with which it has
previously been paired. Press the pairing button on
the wireless remote controller connected to the
camera to pair it with other devices.
•
As camera will not communicate with devices with
which it has not been paired, this option can be
used to prevent signal interference from other
devices in the vicinity.
•
Given that each device must be paired separately,
however, PIN is recommended when connecting to
a large number of devices.
Description