Table of Contents
Advertisement
7 COMBINATION INSTRUMENT
7.18
70
Adjusting the shift speed RPM1
F01400-01
–
Set the hours display using the MODE button.
–
Set the minutes display using the SET button.
–
Press the MODE button and SET button simultaneously.
The set time is adopted and saved.
Condition
The motorcycle is stationary.
ODO > 1000 km (621 mi).
–
Press the MODE button briefly and repeatedly until TRIP 1
appears on the display.
–
Press the MODE button for 5 seconds.
The RPM1 display appears.
Info
The RPM1 display appears in the TRIP 1 display for
each menu by keeping the MODE button pressed.
RPM1 is the engine speed above which the shift
warning light starts flashing.
The engine speed can be set at intervals of 50.
The shift speed RPM1 can only be set up to maxi-
mum 50 revolutions per minute below the shift speed
RPM2.
–
Set the speed with the MODE button and SET button.
Advertisement
Table of Contents
