Table of Contents
Advertisement
12.19
Adjusting the chain tension
Warning
Danger of accidents Incorrect chain tension damages components and results in accidents.
If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear
wheel bearings wear more quickly. Some components may break if overloaded.
If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the
rear wheel locks or the engine will be damaged.
–
Check the chain tension regularly.
–
Set the chain tension in accordance with the specification.
SERVICE WORK ON THE CHASSIS 12
Chain tension
»
If the chain tension does not meet the specification:
–
Adjust the chain tension. (
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 110)
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Check the chain tension. (
5 ... 7 mm (0.2 ... 0.28 in)
p. 139)
p. 108)
p. 138)
139
Advertisement
Table of Contents
