LG 55QNED85SQA Service Manual page 89

CIC Guide
When Sending/ Receiving TV, a message that says 'Set the universal remote
Title
control' pops up.
Product type TV
It is difficult to
set the universal
remote control to
Category
use the Room-to-
Room function.
■ Inquiry: A customer wanted to send/receive the TV screen connected to the set-top box using the Room-to-Room function, but a
Inquiry &
message that says 'Set the universal remote control' pops up.
Reason
■ Reason: Unable to install IR Blaster properly.
1) To send/receive an external TV screen using the room-to-room function, IR Blaster must be connected to the TV.
2) If IR Blaster is not connected, the set-top TV screen cannot be sent/received.
Caution &
Explanation
(If there is no IR Blaster available, it is impossible to use other functions such as changing TV channels even after sending the set-top TV
screen.)
■ Connecting IR Blaster and User Guide
Connect the IR Blaster cable to the IR Blaster port on the back of the TV
- Place both ends (one or two) of the IR Blaster in front of the external device remote control receiver (usually located in front of the
device).
Customer
Service
Guide
All
Product Model
Inquiry
All webOS TV models
launched before 2022
I want to send/receive the TV screen connected to the set-top box using the Room-to-Room
function.
1) I'm not quite sure how to set the universal remote control.
Korea( √ ) Overseas(√ ) CIC
agent(√
Troubleshooting (√ ) Operation ( ) Installation
Copyright © 2022 LG Electronics. Inc. All rights reserved.
Only for training and service purposes.
) Customer( )
(√ )