Table of Contents
Advertisement
2 2
Product Specific Information
A. Appliance Certification
MODELS: 6X-AU
LABORATORY: IAPMO OCEANA
TYPE: Gas Space Heating Appliance
STANDARD: AS/NZS 5263.1.3
This product is tested and approved as a gas space heating
appliance.
This appliance must be installed in accordance with the AS/
NZS 5601.1 rules in force.
Installation and service of this appliance should be performed
by qualified personnel. Hearth & Home Technologies
recommends HHT Factory Trained or certified professionals.
B. BTU Specifications
Inlet Gas Pressure
* Outlet (Manifold) Gas Pressure
Gas Rate
Maximum Gas Consumption
Burner Injector
Pilot Injector
Gas types only through field conversions.
* The allowable Outlet (Manifold) Gas Pressure ranges are: Natural Gas .80 - .95 kPa (.87 kPa nominal) and Propane,
ULPG 2.37 - 2.61 kPa (2.40 kPa nominal). Certification testing setpoint values are shown.
Natural Gas
1.13 - 3.40 kPa
.87 kPa
.405
/
m3
h
40.60 MJ/h
0.124 DMS (3.150 mm)
Ø .023 (.584 mm)
Heat & Glo • 6X-AU Owner's Manual • 2508-981 Rev. L • 8/22
C. Glass Specifications
This appliance is equipped with 5 mm ceramic glass with
an anti-reflective coating. Replace glass only with glass
with identical specifications. Please contact your dealer
for replacement glass.
THE GUARD IS FITTED TO THIS APPLIANCE
TO REDUCE THE RISK OF FIRE OR INJURY
FROM BURNS AND NO PART OF IT SHOULD
PERMANENTLY BE REMOVED. FOR PROTEC-
TION OF YOUNG CHILDREN OR THE INFIRM.
A SECONDARY GUARD IS REQUIRED.
D. High Altitude Installations
NOTICE: If the heating value of the gas has been reduced,
these rules do not apply. Check with your local gas utility
or authorities having jurisdiction.
When installing above 2000 ft. (610 m) elevation:
Reduce input rate 4% for each 1000 ft. (305 m) above
2000 ft. (610 m).
Propane
2.75 - 3.40 kPa
2.49 kPa
.134
/
m3
h
40.10 MJ/h
#49 DMS (1.854 mm)
Ø .014 (.356 mm)
ULPG
2.75 - 3.40 kPa
2.49 kPa
.111
/
m3
h
30.60 MJ/h
#53 DMS (1.511 mm)
Ø .010 (.254 mm)
7
Advertisement
Table of Contents
Troubleshooting
