JLG 1250AJP Operation & Safety Manual page 47

3.5.1 Platform Control Station Functions
To avoid serious injury, do not operate machine if any control levers or toggle
switches controlling platform movement do not return to the off or neutral position
when released.
Only use the platform leveling override function for slight leveling of the platform.
Incorrect use could cause the load/occupants to shift or fall. Failure to do so could
result in death or serious injury.
Axle Extend / Retract
Allows the operator to extend or retract the axles. The axles can only be extended or retracted while
the machine is being driven forward or reverse.
Capacity Select
This switch allows the operator to select between an operating envelope with a 500 lb (227 kg for
ANSI markets and 230 kg for CE, UKCA, and Australia markets) capacity restriction or a 1000 lb (454
kg for ANSI markets and 450 kg for CE, UKCA, and Australia markets) capacity restriction.
Drive Orientation Override
When the boom is swung over the rear tires or further in either direction, the Drive Orientation
indicator will illuminate when the drive function is selected. Push and release the switch, and within
3 seconds move the Drive/Steer control to activate drive or steer. Before driving, locate the black/
white orientation arrows on both the chassis and the platform controls. Move the drive controls in a
direction matching the directional arrows for the intended direction of travel.
Drive Speed / Torque Select
The machine has a two position switch - The forward position gives maximum drive speed. The back
position gives maximum torque for rough terrain and climbing grades.
1250AJP
WARNING
WARNING
31222384
Machine Controls and Indicators
47