Table of Contents
Advertisement
Providing properventilation for
your
Projector
When you
install
your Projector, maintain a distance
of at least 4 inches (10 cm) between the Projector
and other objects (walls, cabinet sides, etc.) to
ensure proper ventilation. Failing to maintain proper
ventilation may result in a fire or a problem with
the product caused by an increase in its internal
temperature.
•
When operating the Projector in an enclosed space,
allow at least19 inches (50 cm) clearance around
the intake and exhaust vents.
Operation
•
Move the product by holding the body. Do not hold
the Lens Cap.
•
This apparatus uses batteries. In your community,
there might be environmental regulations that
require you to dispose of these batteries properly.
Please contact your local authorities for disposal or
recycling information.
•
Store
the
accessories (remote control, or etc.) in a
location safely out of
the
reach of children.
•
When you need to turn off the Projector
completely, wait until the fan stops completely so
that the Projector can cool down completely.
•
Do not dispose of remote control or batteries in
a fire.
•
Do
not
short-circuit, disassemble, or overheat the
batteries.
English
-
4
•
Do not drop or strike the product. If the product is
damaged, disconnect the power cord and contact a
Samsung service center.
•
CAUTION:
There is danger of an explosion if you
replace the batteries used in the remote with the
wrong type of battery. Replace only with the same
or equivalent type.
•
WARNING-
TO
PREVENT THE SPREAD
OF FIRE, KEEP CANDLES AND OTHER
ITEMS WITH OPEN FLAMES AWAY
FROM THIS PRODUCT AT ALL TIMES.
•
Leaving a battery in an extremely high
temperature surrounding environment that can
result in an explosion orthe leakage of flammable
liquid or gas;
•
A battery subjected to extremely low air pressure
that may result in an explosion or
the
leakage of
flammable liquid or gas.
Caring for the Projector
•
To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product with
a soft, dry cloth. Do not use any chemicals such
as wax,
benzene,
alcohol, thinners, insecticide,
airfresheners, lubricants, or detergents.
These
chemicals can damage the appearance of the
Projector or erase the printing on the product.
•
The exterior of the Projector can get scratched
during cleaning. Be sure to wipe the exterior
carefully using a soft cloth to prevent scratches.
•
Do not spray water or any liquid directly onto the
Projector. Any liquid that goes into the product may
cause a failure, fire, or electric shock.
Advertisement
Table of Contents
