Installing A Pci Board - NEC Bull NovaScale R620 User Manual

Installing a PCI Board

Follow the procedure below to install the board to be connected to the PCI board slot.
TIPS:
To install the PCI board, make sure the shape of the board connector matches with the shape of the PCI board slot
connector.
1.
Remove the CPU/IO module referring to the page 8-11.
2.
Identify the slot to which you want to install a PCI board and remove the connector cap.
IMPORTANT:
Carefully keep the removed connector cap.
3.
Remove the PCI bracket by loosening the screw and remove the slot
cover of an expansion slot.
IMPORTANT:
Keep and store the removed slot cover with care.
4.
Remove the connector cap installed in the slot in which the board is installed.
TIPS:
To install the PCI board, make sure the shape of the board connector matches with the shape of the PCI board
slot connector.
IMPORTANT:
Keep and store the removed connector cap with care.
NovaScale R620 User Guide
8-32
Screw
Bracket
Expansion
slot cover