National Instruments NI PXI-8108 User Manual page 71

Note
For the standards applied to assess the EMC of this product, refer to the Online
Product Certification section.
Note For EMC compliance, operate this device with shielded cabling.
CE Compliance
Online Product Certification
Environmental Management
EU Customers
recycling center. For more information about WEEE recycling centers, National
Instruments WEEE initiatives and compliance with WEEE Directive 2002/96/EC on Waste
Electrical and Electronic Equipment, visit
© National Instruments Corporation
This product meets the essential requirements of applicable European
Directives as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Refer to the product Declaration of Conformity (DoC) for additional
regulatory compliance information. To obtain product certifications and the
DoC for this product, visit
number or product line, and click the appropriate link in the Certification
column.
National Instruments is committed to designing and manufacturing
products in an environmentally responsible manner. NI recognizes that
eliminating certain hazardous substances from our products is beneficial
not only to the environment but also to NI customers.
For additional environmental information, refer to the NI and the
Environment Web page at
environmental regulations and directives with which NI complies, as well
as other environmental information not included in this document.
Waste Electrical and Electronic Equipment (WEEE)
At the end of the product life cycle, all products must be sent to a WEEE
ni.com/certification
ni.com/environment
ni.com/environment/weee
A-5
Appendix A Specifications
, search by model
. This page contains the
.
NI PXI-8108 User Manual