Table of Contents
Advertisement
Chapter 3
I/O Information
Trigger
NI PXI-8108 User Manual
Figure 3-7. Installing a Ferrite on the USB Cable
The TRIG connector is the software-controlled trigger connection for
routing PXI triggers to or from the backplane trigger bus.
Figure 3-8 shows the TRIG connector location on the NI PXI-8108.
Table 3-8 lists and describes the trigger connector signals.
Figure 3-8. TRIG Connector Location and Pinout
NI PXI-8108
Embedded Controller
3-10
2
1
ni.com
Advertisement
Table of Contents
