Garmin G1000 Diamond DA42NG Pilot's Manual page 257

4) Enter the identifier, facility, or city name of the departure waypoint; or select a waypoint from the submenu of
waypoints and press the ENT Key to accept the waypoint entry.
5) Turn the FMS Knobs to enter an arrival time and press the ENT Key.
6) Turn the FMS Knobs to enter an arrival date and press the ENT Key.
7) Press the ENT Key with 'COMPUTE RAIM?' highlighted to begin the computation.
Predicting RAIM availability at the aircraft present position:
1) Select the AUX-GPS Status Page.
2) Press the FMS Knob. The RAIM Prediction 'WAYPOINT' field is highlighted.
3) Press the MENU Key, highlight 'Set WPT to Present Position', and press the ENT Key.
4) Press the ENT Key to accept the waypoint entry.
5) Turn the FMS Knobs to enter an arrival time and press the ENT Key.
6) Turn the FMS Knobs to enter an arrival date and press the ENT Key.
7) Press the ENT Key with 'COMPUTE RAIM?' highlighted to begin the computation.
Status of the RAIM computation for the selected waypoint, time, and date is displayed at the bottom of the
RAIM PREDICTION Box as follows:
• 'COMPUTE RAIM?' - RAIM has not been computed.
• 'COMPUTING AVAILABILITY' - RAIM calculation is in progress.
• 'RAIM AVAILABLE' - RAIM is predicted to be available.
• 'RAIM NOT AVAILABLE' - RAIM is predicted to be unavailable.
The Satellite Based Augmentation System (SBAS) provides increased navigation accuracy when available. SBAS
can be enabled or disabled manually on the GPS Status Page.
RAIM Softkey
(displays RAIM
PREDICTION)
190-00962-02 Rev. A
Figure 5-103 SBAS Display - Active
Garmin G1000 Pilot's Guide for the Diamond DA42NG
FLIGHT MANAGEMENT
SBAS Status
SBAS SELECTION Box
- EGNOS Enable/Disable
- MSAS Enable/Disable
- WAAS Enable/Disable
SBAS Softkey
(displays SBAS Selection)
243