Table of Contents
Advertisement
5. To stick the cassette size labels.
Stick the cassette size labels that indicate and correspond to the
desired size on the marked positions for sticking (2 positions). If you
change the size to A5 or 8-1/2 x 5-1/2, take out the paper size
indication plateand stick the size label on the indication plate and
align the sticking line as shown in the figure.
Size label
Size label for indication plate
Paper size indication plate
6. To change the paper size indication plate.
Take out the paper size indication plate and insert it so that the name
of set paper size can be seen through the paper size indication
window.
The paper size is written on both front and rear faces of the paper
size indication plate.
7. To install the cassette main unit on the paper
tray.
Install the cassette main unit by putting the four projections into the
corresponding holes of the paper tray.
Paper tray
Size label
Label sticking line (white)
Paper size indication plate
Cassette main unit
(9) SF-DM11
Parts included
ADU drive unit:1pc.
Before performing the following procedure, be sure
to remove the power plug of the copier main unit.
1. To remove the rear cabinet of the copier main
unit.
Remove the four screws that fix the rear cabinet of the copier main
unit and remove the rear cabinet.
Fixing screw
Rear cabinet
Fixing screw
5 – 37
Right stopper:1pc.
Fixing screw(M4 x 8):2pcs.
Advertisement
Table of Contents
