3 Operation
10
3.2 Adjusting the suction
power
11
12
28
5. Set the nozzle switch to "carpet" or "hard floor"
(Fig. 10/1) according to the floor to be cleaned:
- hard floor (Fig. 10/a)
Laminate, tiles, PVC, etc.
- Carpet (Fig. 10/b)
Short- and deep-pile carpets, rugs, etc.
6. When working with the cylinder vacuum cleaner, pull if
after you like a sleigh. Follow the respective
recommendations of the flooring manufacturers.
You can adjust the suction power to suit the type of floor
being cleaned.
1. Slide the suction-power control to adjust the suction
power (Fig. 11):
- low suction power, e.g. for textiles or upholstered
furniture
- high suction power, e.g. for deep-pile carpets
(low .......
NOTE:
With the bypass vent (Fig. 12) you can quickly reduce
suction power if less suction is needed, e.g. to release
objects accidentally sucked in.
....... high)