Remote Controller Introduction For Ybe1Fb6 - Gree GWH09YCXB-K6DNA1C Service Manual

Service Manual

6.2 Remote Controller Introduction for YBE1FB6

Buttons on remote controller
On/Off On/Off
UD-swing UD-swing
NOTE:
● This is a general use remote controller. It could be used for
the air conditioner with multifunction. For the functions which the
model doesn't have, if press the corresponding button on the
remote controller, the unit will keep the original running status.
● After putting through the power, the air conditioner will give out
a sound. Power indicator "
the air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller,
the signal icon " " on the display of remote controller will blink
once and the air conditioner will give out a "di" sound, which
means the signal has been sent to the air conditioner.
1. On/Off button
Press this button to turn on the unit. Press this button again to turn
off the unit.
2. Mode button
Press this button to select your required operation mode:
Technical Information
Wifi Wifi Health Health
Timer on Timer on LR-swing LR-swing
Clock Clock Timer off Timer off Light Light
" is ON. After that, you can operate
Introduction for icons on display screen
Power limiting operation
TIMER ON / TIMER OFF
● When selecting auto mode, air conditioner will operate
automatically according to ambient temperature. Press "Fan"
button can adjust fan speed. Press "
fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool
mode. Press " + " or " - " button to adjust set temperature. Press
"Fan" button to adjust fan speed. Press "
fan blowing angle.
● When selecting dry mode, the air conditioner operates at low
speed under dry mode. Under dry mode, fan speed can't be
adjusted. Press " " / " " button to adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan,
no cooling and no heating. Press "Fan" button to adjust fan speed.
Press " " / " " button to adjust fan blowing angle.
● When selecting heat mode, the air conditioner operates under
heat mode. Press " + " or " - " button to adjust set temperature.
Press "Fan" button to adjust fan speed. Press "
adjust fan blowing angle.
NOTE:
● For preventing cold air, after starting up heat mode, indoor unit
will delay 1~5 minutes to blow air (Actual delay time depends on
indoor ambient temperature).
Quiet
Set fan speed
Turbo mode
Send signal
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
X-FAN function
Humidity control
Set temperature
Indoor ambient
temp.
Indoor ambient
humidity
Set time
Left & right swing
Up & down swing
Child lock
Fast cool
Health function
WiFi function
LED
Auto LED
I feel
Sleep mode
" / " " button can adjust
" / " " button to adjust
" / " " button to
51