Performing The Hotsync ® Operation Using The Bluetooth ® Function - Sony CLIE PEG-UX40 Handbook

Performing the HotSync
Bluetooth
If you are using a Bluetooth
wireless HotSync
Prior to performing the HotSync
Bluetooth
To perform the HotSync
computer using the Bluetooth
connection setting for Bluetooth
Preparing your CLIÉ handheld
Note
Prior to performing the following procedure, enable the Bluetooth
computer. For details, refer to the manual of your computer.
1
Tap V at the top right of the Preferences screen, and select
[Connection].
2
Tap [New...].
3
Enter the connection name in the name field.
Enter a unique name for each computer.
Custom is displayed by default.
4
Tap V next to [Connect to], and select [PC].
5
Tap V next to [Via], and select [Bluetooth].
6
Tap [Tap to Find] next to [Device].
Your CLIÉ handheld starts to detect Bluetooth
located within a range of the communication area.
When detection is complete, Bluetooth
CLIÉ handheld are listed.
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
function
®
compatible computer, you can perform the
®
operation between your CLIÉ handheld and computer.
®
function
®
operation between your CLIÉ handheld and
®
function, you need to configure a new
®
®
operations)
®
operation using the
®
operation using the
to register your computer as a target device.
®
compatible devices
®
compatible devices around your
®
®
function of your
Continued on next page
• • • • • • • • • • • • • • • • • • •
119