Customizing Hotsync Manager Startup And Hotsync Setup Options; Customizing Hotsync ® Manager Startup And Hotsync ® Setup Options - Sony CLIE PEG-UX40 Handbook

Customizing HotSync
®
HotSync
1
Click
area) at the bottom right of the computer window, and select
[Setup] from the shortcut menu.
The Setup dialog box is displayed.
2
Click [General] tab, and select the setting as needed.
If you are not sure which option to use, select [Always available].
• Always available: Starts the HotSync
starts. This allows you to perform a HotSync
Palm™ Desktop for CLIÉ is not running.
• Available only when the Palm Desktop is running: Starts the
HotSync
• Manual: Starts the HotSync
[HotSync
3
Click [Local] tab and adjust the setting for the connection
between the computer and your CLIÉ handheld as needed.
• Serial port: Specifies the computer port that is used for the HotSync
operation. Make sure that the serial port for the HotSync
not shared with the port for modem.
• Speed: Determines the speed at which files/data are transferred. Try
the As Fast As Possible rate first, and adjust downward if you have
any problems.
Note
You can not perform the HotSync operation via a serial port between your CLIÉ
handheld and a computer.
4
Click [Modem] tab, and select the setting for the modem as
needed.
5
Click [Network] tab, and select the setting for the network as
needed.
6
Click [OK] to finish.
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
setup options
(HotSync) in the Windows task tray (Notification
®
Manager when you start Palm™ Desktop for CLIÉ.
®
Manager] from [start] in Windows.
®
operations)
Manager startup and
®
Manager when Windows
®
operation even when
®
Manager only when you select
®
®
®
operation is
115