Performing The Hotsync Operation Via A Wireless Lan (For Peg-Ux50 Only); Performing The Hotsync ® Operation Via A Wireless Lan (For Peg-Ux50 Only) - Sony CLIE PEG-UX40 Handbook

Performing the HotSync
wireless LAN (for PEG-UX50 only)
To operate the HotSync
administrator skills.
You can perform the HotSync
handheld and the computer on the LAN of your office, depending on the
network environment of your office. For details, contact the System
Administrator of the LAN.
Preparing your computer
1
Click
area) at the bottom right of the computer window, and select
[Network] from the shortcut menu.
2
Click
area) at the bottom right of the computer window once again,
and select [Setup] from the shortcut menu.
The Setup dialog box is displayed.
3
Click [Network] tab.
4
Click the check box next to the user name for HotSync.
5
Click [OK].
6
Connect your CLIÉ handheld to the computer by a USB
cable, and perform the Hotsync operation by tapping
(HotSync).
The computer information (Primary PC name and Primary PC address (IP
address)) is transferred to your CLIÉ handheld.
When you perform the HotSync
handheld identifies the computer based on the information transferred.
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
®
operations via a network, you must have network
®
operation via a network between your CLIÉ
(HotSync) in the Windows task tray (Notification
(HotSync) in the Windows task tray (Notification
®
®
operations)
operation via a
operation via a network, your CLIÉ
Continued on next page
• • • • • • • • • • • • • • • • • • •
®
116