Performing The Hotsync ® Operation Using The Bluetooth™ Function; Only); Performing The Hotsync ® Operation Using The Bluetooth™ Function (For Bluetooth™ Built-In Models Only) - Sony CLIE PEG-NX73V Handbook

Performing the HotSync
Bluetooth™ function
If you are using a Bluetooth™ compatible computer, you can perform a
wireless HotSync
Prior to performing the HotSync
Bluetooth™ function
To perform the HotSync
computer using the Bluetooth™ function, you need to configure a new
connection setting for Bluetooth™ to register your computer as a target device.
Preparing your CLIÉ handheld
Note
Prior to performing the following procedure, enable the Bluetooth™ function of your
computer. For details, refer to the manual of your computer.
1
Tap the arrow V at the top right of the Preferences screen
and select Connection.
2
Tap New....
3
Enter name.
Enter a unique name for each computer.
Custom is displayed by default.
4
Tap the arrow V next to Connect to and select PC.
5
Tap the arrow V next to Via and select Bluetooth.
6
Tap Tap to discover next to Device.
Your CLIÉ handheld starts to detect Bluetooth™ compatible devices
located within a range of the communication area.
When detection is complete, Bluetooth™ compatible devices around your
CLIÉ handheld are listed.
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
(for Bluetooth™ built-in models only)
®
operation between your CLIÉ handheld and computer.
®
operation between your CLIÉ handheld and
®
operations)
operation using the
®
operation using the
Continued on next page
• • • • • • • • • • • • • • • • • • •
®
110