Customizing Hotsync Manager Startup And Hotsync Setup Options; Customizing Hotsync ® Manager Startup And Hotsync ® Setup Options - Sony CLIE PEG-TH55 Handbook

Customizing HotSync
®
HotSync
1
Click
area) at the bottom right of the computer window, and select
[Setup...] from the menu.
The Setup window is displayed.
2
Click [General], and select the setting as needed.
If you are not sure which option to use, select [Always available].
• Always available: Starts HotSync
starts. This allows you to perform the HotSync
CLIE Organizer for PC (or Palm™ Desktop for CLIÉ) is not
running.
• Available only when the Palm Desktop is running: Starts the
HotSync
If you select this, HotSync
CLIE Organizer for PC.
• Manual: Starts HotSync
[HotSync
3
Click [Local] and adjust the setting for the connection
between the computer and your CLIÉ handheld as needed.
• Serial port: Specifies the computer port that is used for the HotSync
operation. Make sure that the serial port for the HotSync
not shared with the port for modem.
• Speed: Determines the speed at which files/data are transferred. Try
the rate, as [As Fast As Possible] first, and adjust downward if you have
any problems.
Note
You cannot perform the HotSync
handheld and a computer.
4
Click [Modem], and select the setting for the modem as
needed.
5
Click [Network], and select the setting for the network as
needed.
6
Click [OK] to finish.
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
setup options
(HotSync) in the Windows task tray (Notification
®
Manager when you start Palm™ Desktop for CLIÉ.
®
®
Manager] from [Start] in Windows.
®
operations)
Manager startup and
®
Manager when Windows
®
®
Manager does not start when using
Manager only when you select
®
operation via a serial port between your CLIÉ
®
operation even when
®
®
operation is
137